Steet Light Pole Welding Machine For Diameter 60mm-500mm Polygonal Pole Welding Machine
Polygonal pole welding machine compirses of main welding unit, pulling device and loading table. Clamps on the moving car of the pulling unit clamp the large end of post, drives the post to move evenly from small end towards large end. There are guiding rollers on the main unit, automatically join the post and the welding machine weld the seam simultaneously. The welding machine is auto submerged-arc welding. The welding flux is recycled automatically. The welded seam is even, continuous and good looking.
1.This machine composed by main machine head , tractive body and feeding shelf.
2.Tractive body was moved by collet in small vehicle nipping the steel poles collet.When the small vehicle moved,drived steel pole,from small collet to big collet ,regularity moved.The big side of the steel pole was hold by feeding vehicle,force automatic sewing from head of machine to steerable wheel. At one time,the welding machine starts welding.
3.This machine adopt multiple wire submerged arc welding,solder was reclaimed automatic. Welding line was symmetrical and slinky. It has strong filter,forming one time,and be with high welding efficiency. The speed of welding achieve 2 to 3 meters per minutes,is about 3 times of the gas welding .
4.The cost of the welding is lower than gas weldong. It is with speedy welding ,high efficiency ,and lowest price in China light poles industry now.