Four / Three Roll Plate Bending Machine , Metal Cone Rolling Machine

Basic Information

Get Best Price Contact Now

Max Thickness:	20mm	Width:	3000mm
Types:	Hydraulic	Function:	Bending Cone
Delivery Time:	60 Days	Electrical:	Siemens
Hydraulic:	Japan
High Light:	hydraulic plate rolling machine , metal plate rolling machine

W12-20*3000 W11 3 4 Roller Plate Bending Machine Cone Rolling Machine Tank Rolling Machine Flange Rolling Machine

1. Work Roll

An important component of the bending machine, forging quality 50Mn, and hardening and tempering to reach a higher

hardness (HB300-320),(CD/NK002-90 Bending Machine technical standard conditions) and then finishing.

2. Rack

Main body, high and short rack each one bending machine.

3. Discharge Devices

Installed on the side of upper roller drive,the department constitute on pressure balance on the roller used for unloading.

4. Overturned Institutions

Installed in the side of the fell down fell down flip and recovery, and fell down the fuel tank to perform.

5. Channel Base

Channel steel and steel plate welding, and welding stress and place processing.

6. Hydraulic System

The hydraulic pump station, channel block,throttle,pilot-operated check valve,solenoid valve,cylinders,hydraulic actuators

and piping and other components.

7. Hydraulic Actuators

Hydraulic gear low speed high torque oil motor, planetary gear, balance valve components.

TECHNICAL PARAMETERS

Model	Max.bending thickness (mm)	Pre-bending thickness (mm)	Max.working length of rolls (mm)	Yield limit (Mpa)	Top roller diameter (mm)	Bottom roller diameter (mm)	Side roller diameter (mm)	Main power (KW)
W12-4X2000	4	3.5	2050	245	160	140	120	3
W12-6X2000	6	5	2050	245	190	170	150	4
W12-8X2000	8	6.5	2050	245	210	190	170	5.5
W12-10X2000	10	8	2050	245	230	210	190	7.5
W12-12X2000	12	10	2050	245	270	250	210	11
W12-16X2000	16	13	2050	245	300	270	220	11
W12-20X2000	20	16	2050	245	330	300	240	11
W12-25X2000	25	20	2050	245	360	330	250	15
W12-30X2000	30	25	2050	245	390	360	300	18.5
W12-35X2000	35	28	2050	245	430	390	330	22
W12-40X2000	40	32	2050	245	460	420	360	30
W12-45X2000	45	36	2050	245	510	460	390	37
W12-50X2000	50	40	2050	245	550	510	420	45
W12-4X2500	4	3.5	2550	245	190	170	150	4
W12-6X2500	6	5	2550	245	210	190	170	5.5
W12-8X2500	8	6.5	2550	245	230	210	190	7.5
W12-10X2500	10	8	2550	245	270	250	210	11
W12-12X2500	12	10	2550	245	300	270	220	11
W12-16X2500	16	13	2550	245	330	300	240	11
W12-20X2500	20	16	2550	245	360	330	250	15
W12-25X2500	25	20	2550	245	390	360	300	18.5
W12-30X2500	30	25	2550	245	430	390	330	22
W12-35X2500	35	28	2550	245	460	420	360	30
W12-40X2500	40	32	2550	245	510	460	390	37
W12-45X2500	45	36	2550	245	550	510	420	45
W12-4X3000	4	3.5	3100	245	210	190	170	5.5
W12-6X3000	6	5	3100	245	230	210	190	7.5
W12-8X3000	8	6.5	3100	245	270	250	210	11
W12-10X3000	10	8	3100	245	300	270	220	11
W12-12X3000	12	10	3100	245	330	300	240	11
W12-16X3000	16	13	3100	245	360	330	250	15
W12-20X3000	20	16	3100	245	390	360	300	18.5
W12-25X3000	25	20	3100	245	430	390	330	22
W12-30X3000	30	25	3100	245	460	420	360	30
W12-35X3000	35	28	3100	245	510	460	390	37
W12-40X3000	40	32	3100	245	550	510	420	45
W12-50X3000	50	40	3100	245	610	560	480	55
W12-60X3000	60	48	3100	245	670	620	520	75

Description and specification given in this catalogue are subject to modification without notice.

Four / Three Roll Plate Bending Machine , Metal Cone Rolling Machine 0

Tag:

hydraulic plate rolling machine